Special Surface Requirement Supplies
for Duralabel PRO Printers
Duralabel PRO specialty supplies are ideal for surfaces which may be coated, contaminated or require a certain adhesion to apply labels and signs.
Oily Surface Labels
This label tape has an adhesive that is specially formulated to aggressively adhere to surfaces contaminated with oil, grease, rust and light debris. These labels can even adhere to plastics which have been generously coated with both WD-40 and dirt (tested here at GP).
- The adhesive resists oil, gasoline, moisture, sulfuric acid, and salt spray.
- Oily surface label stock is made with an exposed liner, making it easier for your customer to peel the label off the liner.
Electrostatic Dissipative Tape
This 2.0-mil silver polyester has a smudge-resistant top coat that is impervious to abrasion and static-induced print head voids. Perfect for use in areas sensitive to electrostatic discharged.
- UL 969 Recognized
- Service Temperature -40° F to over 300° F
UL 969 Compliant Poly Tape
When used with our DuraLabel standard black ribbon, labels printed using this supply are UL 969 approved for product labeling.
- UL 969 Recognized
High-Tack Tape (in White & Clear)
High-Tack label stock features a special adhesive that offers a superior bond to a number of surfaces, including those that are rough textured, have low-surface-energy plastics, or are fabric. Know your labels will stick where they're needed.
The following surfaces all have an ultimate peel greater than 80oz/in:
- ABS, Acrylic, Acrylic Powder Paint, Aluminum, Epoxy Powder Paint, Glass, Painted Metal, Polycarbonate, Polyester, and Polyurethane Powder Paint
High-Temp Poly (max. 300°F)
Whether placed directly on a hot surface or near equipment which may be emitting hot steam, the durable poly will last for years.
- Service Temperatures -40°F to 300°F
- Adheres well to irregular surfaces such as rivets and other curved, textured surfaces
LN2 Poly Tape
Specifically designed to be applied to well below freezing surfaces which other labels are not designed to withstand.
- Service Temperatures -122° F to 176° F
- Smudge and abrasion resistant print
- Permanent adhesive for a superior bond to high and low energy surfaces
Extreme High-Temp Poly Labels (max. 700°F)
This supply is designed to withstand heat exposures up to 700°F and to bond well to high energy surfaces to hold the label in place for years. The special topcoat has static dissipative properties to reduce print voids due to static generated print heads. Available in White.
DuraTag™ (Tag Stock)
This special material is made up of several tough layers to create an indestructible tag. Ideal for valve tags and surfaces which may not have room for a label or sign.
- Tare-resistant (7.0 mil thick)
- Chemicals and moisture
- 6 colors
- No grommets are necessary
- Apply with a zip-tie
DuraTag Lockout/Tagout Tag Stock
This supply uses the same DuraTag™ tag stock for an extra durable tag. Rely on this supply when you need quick, visible, legible Lockout/Tagout tags.
- Red and white candy stripe pattern
- Black, red and white header
- 3" x 5" tags on continuous rolls
Shrink Tubing
Shrink Tube supply is a very durable and flexible material. Specially formulated with cross-linked polyolefin which has a low recovery temperature of a 3:1 ratio with a thin wall. Ideal for wire and cable marking.
- Highly flame-retardent (VW-1)
- UL recognized
- CSA certified and meets military requirements
- Colors available!
Self-Laminating Wire Wraps
This self-laminating supply is simple-to-use. Great for organizing by color-coding wires and cables.
- 6 colors
- self-laminating
- various sizes available
Extended-Life Vinyl Tape
Tired of replacing labels and signs that don't hold-up? Use this supply to meet and exceed labeling standards. With its 8 year durability, be assured safety labels and signs will be visible for years. Ideal for indoor and outdoor applications, print OSHA compliant signs, pipe markers, warehouse labels, wayfinding and other labels and signs. RoHS compliant (cadmium free).
Circuit Board Polyimide Tape
The topcoat of this supply provides a high Print Contrast Signal (PCS) ideal for scanning barcodes.
- Great for: barcode and product labeling
- high-temperature rating
- endures wave solder and standard acidic solvents
Magnetic Supply
Ideal for metal surfaces where labels may be moved and re-used over and over again. Does not leave a sticky residue.
- Great for: vehicles signs, inventory labels
- use over and over again
- lowers reproduction of same label
Nylon Label Tape
This durable supply is extremely flexible. It bends and moves with the surface it applied to, while keeping its shape and clearly conveying its printed message. Apply to fabrics and irregular shaped materials for a tough label.
Search for other DuraLabel Specialty Labeling Supplies By:
Specific Surface Labels |
Extreme Temperature Labels |
Adhesive Requirements
Labeling Adhesives |
High Visibility Labels
