Block Margin Function (B. MARGIN)
The width of the margins between text blocks can
be set between 0.00" and 12.00" (0.0 cm
and 30.0 cm). The left and right margins for each
text block will have a width that is the specified
setting. If the AUTO setting is selected, the block
margins will be 0.00" (0.00 cm) if only one
text block has been created and 0.13" (0.3
cm) if multiple text blocks have been created.
To change the Block Margin setting:
Hold
down the CODE key and press the GLOBAL key.
| NOTE |
|
 This
step may be skipped if the settings for several
format functions are being applied at the same
time.
|
Press
the left/right cursor keys until B.MARGIN is displayed.
The current setting is shown in the left center of
the display. A diagram illustrating the block margin
is shown on the right side of the display.
Use
the up/down cursor keys to select the desired block
margin setting. Or use the number keys to type in
the block margin. Press RETURN to save this setting.
To return to the text without making any changes,
push the CANCEL key.
| NOTE |
|
To
change the setting in 0.1" (1.0 cm) steps,
hold down either the up or down cursor key until
the desired setting is reached.
To
return the function to its default setting (AUTO),
press the space bar.
The
block margins are displayed in the currently
selected unit of measurement (inches or centimeters).
The unit of measurement can be changed with
the Setup Functions.
|
| NOTE |
|
To
apply several format settings, continue to use
the left/right and up/down cursor keys to make
selections until you have selected all of the
desired settings.
Only after all settings have
been selected should the RETURN key be pushed
to apply those settings.
|
