KSun 9600Ki Free Online Tutorial

KSun 9600Ki Tutorial - Error Messages

Table of Contents [ Error Messages 2 - Error Messages 3 - Error Messages 4 ]

9600Ki Error Messages
16 Line Limit	50 Line Limit Reached!	Batteries Weak!	Buffer Empty!
Buffer Full!	Can't Feed AV Labels!	Cassette Changed!	Change Adapter!
Charge Batteries!	Close Cassette Cover!	Cutter Error!	EPROM Error!
Feed Error!	Input Whole Code!	Interface Error!	Invalid Characters!
Length Limit!	Line Limit! XX Lines Maximum	Memory Full!	Min 4 Digits!
No Files!	No Tape!	Replace Batteries!	Set XX Tape!
Set AVI1789 Tape!	Set AVI1957 Tape!	Set AV2067 Tape!	Set Stamp-X!
Tape End!	Text Too High!	Text Too Long!	Value Out Of Range! Check Value And Re-Enter

ERROR MESSAGE	CAUSE	SOLUTION
Length Limit!	This message appears if you try to use the Layout Preview function when the length of the text is greater than the 3'-1/3" (1 meter) limit.	Delete some of the text.
Line Limit! XX Lines Maximum ("XX" is the number of lines)	This message appears if you try to print or use the Layout Preview function when the number of lines in the text is greater than the maximum possible for the installed tape. This message also appears if you try to print or use the Layout Preview function when the number of lines in the text is greater than the maximum possible for the installed tape. Since the number of lines possible depends on the width of the tape, the message that appears depends on the tape width. 16 Lines on 36mm tape 13 Lines on 24mm tape 10 Lines on 18mm tape 6 lines on 12mm tape 4 lines on 9mm tape 3 lines on 6mm tape	Reduce the number of lines or install a wider tape.
Memory Full!	The message appears if you try to store a text file after the maximum number of characters has already been stored in the memory.	Delete an unwanted file to make space for the new one.
Min 4 Digits!	This message appears if less than the minimum four digits are entered as the barcode data.	Enter a minimum of four digits before pressing RETURN.
No Files!	This message appears if no files are stored in the memory when you try to recall, delete or print one.	Store a text file before trying to recall, delete or print one.
No Tape!	This message appears if no tape cassette is installed when you try to feed the tape, print or use the Layout Preview function.	Install a tape cassette and try again.
Replace Batteries!	This message appears when the installed Ni-MH battery is about to run out, or when the battery has reached a high voltage.	Replace the battery or use the AC adapter.
Set XX Tape! ("XX" is the width of the tape)	This message appears if the correct width tape is not installed when printing an Auto Format template created for a specific tape width.	Install a tape cassette of the width specified in the error message.