KSun 9600Ki Free Online Tutorial

KSun 9600Ki Tutorial - Error Messages

Table of Contents [ Error Messages 3 - Error Messages 4 - Troubleshooting ]

9600Ki Error Messages
16 Line Limit	50 Line Limit Reached!	Batteries Weak!	Buffer Empty!
Buffer Full!	Can't Feed AV Labels!	Cassette Changed!	Change Adapter!
Charge Batteries!	Close Cassette Cover!	Cutter Error!	EPROM Error!
Feed Error!	Input Whole Code!	Interface Error!	Invalid Characters!
Length Limit!	Line Limit! XX Lines Maximum	Memory Full!	Min 4 Digits!
No Files!	No Tape!	Replace Batteries!	Set XX Tape!
Set AV1789 Tape!	Set AV1957 Tape!	Set AV2067 Tape!	Set Stamp-X!
Tape End!	Text Too High!	Text Too Long!	Value Out Of Range! Check Value And Re-Enter

ERROR MESSAGE	CAUSE	SOLUTION
Set AV1789 Tape!	This message appears if an 600FF File Folder label cassette is not installed when printing an 600FF File Folder template in the Auto Format function.	Install an 600FF File Folder label cassette.
Set AV1957 Tape!	This message appears if an 600RA Return Address label cassette is not installed when printing an 600RA Return Address template in the Auto Format function.	Install an 600RA Return Address label cassette.
Set AV2067 Tape!	This message appears if an 600AD Address label cassette is not installed when printing an 600AD Address template in the Auto Format function.	Install an 600AD Address label cassette.
Set Stamp-X! (X is either "L" or "M")	This message appears if the appropriate width stamp tape cassette is not installed when printing an Auto Format template created for either a STAMP L or STAMP M stamp.	Install the correct width stamp tape cassette.
Tape End!	This message appears if the end of the tape in the cassette has been reached	Replace the tape cassette and then, after closing the tape compartment cover, press any key.
Text Too High!	This message appears if the size of the text is larger than the width of the installed tape. This message appears if the Lines of Text setting for the ESC/P Interface Mode exceeds the maximum possible for the installed tape.	Reduce the size of the characters, install a tape with a greater width or select the AUTO text size setting. Specify the correct setting for the installed tape.
Text Too Long!	This message appears if the length of the text is longer than the label length that has been set with the Tape Length function. This message appears if you try to print a label that is longer than the maximum label length. This message appears if you try to print a label that is longer than the maximum label length or is longer than the specified block length. This message appears if the length of the text is longer than the width of the tape when the Text Rotation function is used.	Press the CANCEL key. Use the AUTO Size setting to format a label with a specific length, as described on the Size Function page.
Value Out Of Range! Check value and reenter.	This message appears if the value entered while setting the Tape Margin, Tape Length, Block Margin, or Block Length function is not within the allowable range. This message appears if the specified characters cannot be found in the database. This message appears if the values for the records to be printed are not within the allowable range.	Type in a value that is within the allowable range.