Feed & Cut Key
Press
this key to feed out any leftover printed tape after
pressing the CANCEL key to stop printing.
| NOTE |
|
Only
tape can be fed out and cut using this function.
If an label cassette is installed when the CODE
key is held down and the "CUT & FEED"
key is pressed, the error message "CAN'T
FEED LABELS" appears.
After
printing with the Auto Cut function set to 5,
6, 76 or 8, press the CUT & FEED key to
feed the tape, then cut it.
|
To Feed Out 1" (26 mm) of Tape and Automatically
Cut It:
Press the FEED & CUT key. The message "FEED"
appears.