KSun 9600Ki Free Online Tutorial

KSun 9600Ki Tutorial - Machine Adjustments THEAD ADJUSTMENT Setting

Table of Contents - Tape Length Adjust - Head Adjustment -Half Cutter

This function allows you to shift the printing up or down within a tape.

NOTE

This function does not adjust printing on 1-1/2" (36 mm) wide tapes.

To Change The HEAD ADJUSTMENT Setting

1 ) Hold down the CODE key and press the letter "A" key.

NOTE

This step may be skipped if settings for several Setup Functions are being applied at the same time.

2 ) Press a left / right cursor key until HEAD ADJUSTMENT is displayed as shown below.

3 ) Press an up / down cursor key until the desired setting is displayed. To shift the printing down, select a lower value. To shift the printing up, select a higher value. To return the HEAD ADJUSTMENT setting to its default setting (0), push the space bar.

4 ) Press the RETURN key to apply the setting.

NOTE

To apply several Setup settings at the same time, continue pressing the left / right cursor key to select a function. Then press the up / down cursor key to select the desired setting. Press the RETURN key only after all the functions you wish to change have been set.