KSun 9600Ki Free Online Tutorial

KSun 9600Ki Tutorial - Machine Adjustments - HALF CUTTER Setting

Table of Contents - Half Cutter - USB ID Selection - Error Message List

This function allows you to specify a unique identification number for each 9600Ki connected to a computer for printing through a USB connection. Normally, for easy setup of multiple 9600Ki machines connected to a computer, all 9600Ki's will be set to 000000001, indicating that the data will be printed on all connected 9600Ki machines at the same time.

To Change The US ID SELECTION Setting

1 ) Hold down the CODE key and press the letter "A" key.

NOTE

This step may be skipped if settings for several Setup Functions are being applied at the same time.

2 ) Press a left / right cursor key until USB ID SELECTION option is displayed as shown below.

Changing the USB ID SELECTION setting.

3 ) Press an up / down cursor key until the desired setting is displayed.

To return the function to its default setting (000000001), push the space bar.

4 ) Press the RETURN key to apply the setting.

NOTE

To apply several Setup settings at the same time, continue pressing the left / right cursor key to select a function. Then press the up / down cursor key to select the desired setting. Press the RETURN key only after all the functions you wish to change have been set.