Width Function (WIDTH)
The width function can be used with any of the text
sizes to make the width of the characters wider or
more narrow.
Character width may be changed globally,
for a block, or for
individual lines.
To change the character size:
Place
the cursor in the block or line of text to be formatted
(this is not required for global formatting).
Hold
down the CODE key and press either the GLOBAL, BLOCK
or LINE keys.
| NOTE |
|
 This
step may be skipped if the settings for several
format functions are being applied at the same
time.
|
Press
the left/right cursor keys until WIDTH is displayed.
The setting for the text at the cursor's current position
is shown at the bottom of the display and a sample
can be seen on the right side.
Use
the up/down cursor keys to select the desired width.
When you are finished selecting settings, push the
RETURN key to apply the width setting.
To return to the text without making any changes,
push the CANCEL key.
| NOTE |
|
If
"*****" appears as a setting, the
Width function has already been applied to part
of the current text. For example:
A line in the current block
has a WIDTH set, and the Block or Global format
function is being set.
OR
A block has a WIDTH set, and
the Global Format function is being set.
Changing the setting will
cancel the setting that was previously applied.
To
return the function to its default setting (NORMAL),
press the space bar.
|
| NOTE |
|
To
apply several format settings, continue to use
the left/right and up/down cursor keys to make
selections until you have selected all of the
desired settings.
Only after all settings have
been selected should the RETURN key be pushed
to apply those settings.
|
