**IMPORTANT
NOTICE: Upgrading your current firmware with the Device
Loader Software will ERASE your current memory
along with label lists already stored. You will lose
all of the information now stored in your Brady TLS
2200label printer.
INSTALLATION:
Once you have the DeviceLoader.exe file copied to
your computer's hard drive, do the following:
1. Use the RUN option on your START MENU,
or use Windows Explorer or My Computer. Go to the
locationwhere the DeviceLoader.EXE file was saved.
2. Double-click on DeviceLoader.EXE file.
This will start the installation wizard.
3. Follow the instructions that appear on
your screen by pressing. By default, the program will
install the Brady Device Loader to the following folder:
c:\Program Files\Brady\Brady Device Loader.
Step 2. PREPARE THE Brady TLS 2200
Printer:
PREPARE THE Brady TLS2200:
Be sure your Brady TLS2000 is turned off.
1. Attach the printer communication cable
to the Brady TLS 2200 first and then to a serial port
on your computer.
2. On the Brady TLS 2200 printer hold down
the SHIFT, FUNC & L keys at the same time, and
turn on the Brady TLS 2200.
3. The TLS 2200 printer display will show
"Clear BANKO?Y". Push the ENTER key. The
display will now show: "Begin loading Intel hex
file".
Step 3. RUN THE Brady DEVICE LOADER
SOFTWARE:
1. On your computer click on your START MENU
--> Programs --> Brady Device Loader -->
Brady Device Loader.
2. Select the appropriate portable printer
you are upgrading (Brady TLS 2200 or Brady TLS PC
Link).
3. The next screen akss you to select a file
to download. Available files will be listed in the
box on the right. Select the Brady TLS20302.hex file
to upgrade the firmware on the Brady TLS 2200 printer.
Click Next.
4. Select your COM port, then click Next.
5. Click the Program button. You should see
a percentage increasing on both the computer screen
and the printer display. Once completed, you may click:
-- EXIT to exit the Device Loader installation,
-- PROGRAM to download the software to another Brady
TLS printer,
--or BACK to select the other hex file and download
the program to the printer.
6. Turn the Brady TLS 2200 printer OFF, wait
5 seconds, and then it back ON to initialize the new
firmware
