Brady TLS2200 Labeling Tapes / Supplies
The Brady TLS2200 is used extensively for data communications,
electrical, laboratory, data acquisition instruments,
and electronics labeling.
|
 |
Tremendous variety of supplies:
There are over 300 label types and sizes available
for the Brady TLS2200. The result is that the Brady
TLS2200 can handle a wide range of applications.
Supplies include static dissipative PROM labels;
polyimide board labels; faceplate ID and symbols; static
dissipative component labels; self-laminating wire wraps;
tear-resistant labels; patch panel labels; heat-shrink
sleeving, tamper evident labels and more.
|
Numerous types of labels available
Nylon Cloth - low profile through-conduit
wire marking, component and general labeling.
Paper - Bar code and general labeling
PermaSleeve - Permanent heat shrink wire identification
Polyester - electronic PCB ID and component bar code
labels and rating plates; terminal block, outlet and patch
panel identification, and general labeling.
Polyethylene - multipurpose identification tags, where
durability is required.
Polyimide - Underside PCB ID and other high temperature,
high performance applications.
Polyolefin - Wire marking, fiber optic marking and
general labeling.
Polypropylene - Wire, cable and product inventory labels.
Tedlar - Aerospace and military cable marking, self-laminating
wire and cable wraps.
Vinyl - tamper-evident labels, self-laminating wire and
cable wraps, pathway, racks, voltage markers, wire bundles,
rating plates and general labeling.
Vinyl Cloth - Wire and terminal block marking; component
and general labeling.
PermaSleeve Shrink Tube
Permanent Heat Shrink Wire Identification
Brady's heat shrink PermaSleeve Markers provide permanent,
legible identification for wires and cables. PermaSleeve Markers
are suitable for a wide variety of applications in the commercial,
industrial, military and aerospace markets. Identification
is permanent after printing with no secondary steps required.
Print remains legible after abrasion and exposure to solvents
and chemicals.
Technical Description
- Manufactured from irradiated heat-shrinkable polyolefin
- Meets the rigid material and physical properties
of:
- MIL-DTL-23053/5 Class 1
- MIL-M-81531
- MIL-STD-202F, Method 215
- UL224
- Operating Temperatures: -40�F (-40C) to 267�F
(130�C)
After Shrink Unique Characteristics
- Does not smudge or fade when printed
- Print is permanent; no secondary steps required
- Unique flattened full-circle design provides fast,
permanent wire marking
- Kitted in a convenient format, easily dispensed
for printing
- Conforms tightly to wire after heat is applied
which prevents markers from sliding
- Comes on a carrier which allows for easy presentation
and use at any location
Shrink Tube Selection
- Printable through Brady's desktop and portable
printers: Thermal and Dot Matrix
- Sleeves may be slit at the factory for shorter
marker lengths
- All Brady products are fully supported and warranted
- Available in different colors: yellow, red blue,
orange, green and black.
|
|
