DuraLabel Toro Portable Integrated Labeling Printer
DuraLabel Toro Printer Specifications
Printer
- Type: thermal transfer
- Print Speed: up to 3 inches per second
- Resolution: 300 dots per inch
- Maximum print width: 4.0"
- Unlimited length using DuraSuite software
- 1 year Warranty
Indicators & Buttons
- Indicators: Power, Printer Status, Supply Status, Battery Status
- Buttons: Power, Supply Feed, Keyboard Release, Screen Release, Battery Release
- Communication Interface, USB-A, USB-B, optional print server port
- Memory: 4GB flash; 1GB SDRAM
Power Requirements
- Input Voltage: 24 VDC, 5A
- DuraLabel labelers have worldwide voltage capability.
Environment
- Operating Temperature: 41°F – 104°F (5°C – 40°C)
- Operation Humidity: 30% – 85%, non-condensing
- Storage Temperature: -4°F – 122°F (-20°C – 50°C)
- Storage Humidity: 10% – 90%, non-condensing
- Ventilation: fan mounted on circuit board
Software
- OpenOffice 3.2
- QLabel-IV 1.19 Barcode Software
- DuraSuite 1.5.0.5 Labeling Software
- Adobe Acrobat
Label Stock
- Type: continuous, black mark & die-cut
- Width: 0.5" minimum, 4.00" maximum
- Capacity: 140 ft.
Ribbon Supply
- Type: Wax/Resin, Resin
- Width: 106 mm (4.17 inch)
- Capacity: 360 ft. with 0.5 in. core diameter
Printer Body
- Dimensions: 13.5" wide, 10.25" deep, (L) x 6.7" (H) x 8.8" (W)
- 13.8 lbs (6.26 kg), excluding supplies
Battery (optional)
- Type: Lithium-Ion (Li-Ion), 300 charge life cycle
- Power: 3 hours average continuous print time
- Sleep mode: 3 days
- Charge: 3 hours charge time when battery is < 10% power
- Life: full charge recommended every 3 months
Accessories
- Toro battery and charger (9 month warranty)
- Soft Shell travel case with saddle bag pouches for supplies
- Hard Shell case
- 12V car adaptor
Specifications subject to change
