DuraCut II Vinyl Cutter & Plotter

USING THE DURACUT II IS EASY
It's as easy-to-use as a laser printer.

1. Tri-port connectivity: allows flexibility for data transmission. Parallel, USB and serial connections available.
   
   
2. High Speed Vinyl Cutting - provides optimum cutting speed of 23.62 ips.
   
   
3. 400 grams of cutting force - gives the ability to use different thicknesses of vinyl.
   
   
4. Multifunction - enables you to work with various types of media.
   
   
5. Guaranteed three meter tracking - resolves alignment and media drifting problems before they occur.
   
   
6. Convenient Grooved Cut-off tool - reduces vinyl waste by cutting a finished project in a straight line.
   
   
7. Plot and Cut - using the same machine without changing anything except substituting a pen for the knife.

Operational Method : Roller Type

Maximum Cutting Length: 27 yards

Maximum Cutting Width: 23.6 inches

Maximum Media Loading Width: 28.3 inches

Minimum Media Loading Width: 4.88 inches

Acceptable Material Thickness: 0.03 inches

Memory Buffer: 500 kb

Control Panel: 10 Control Keys, 6 LEDs

Power Supply: AC 100-240V

Interfaces: USB 1.1, Parallel and Serial RS-232C

Dimensions: 8.67" x 34.61" x 10.16"

Net Weight: 24.7 pounds

Minimum Computer / Software Requirements

Windows 98 or later operating system; Pentium II 400; 256mb RAM; 100mb hard disk space; minimum screen resolution 600*800 with 16 bit color; and a CD-ROM drive.