USING THE STIKA IS EASY
Eye-catching, simple and easy to use. The STIKA quickly creates graphic lettering for a variety of applications. Both letters and graphics can be cut from sheets of vinyl.

1. Design a graphic on your PC using the Dr. Stika Plus software.
   
   
2. Print it. The Stika accurately cuts out your design. It's as easy-to-use as your regular computer printer.
   
   
3. Peel away the excess vinyl.
   
   
4. Apply the graphic.
   
   
5. You're done!

Max Cutting Area: 9.813" x 39.313" (250mm x 1000mm)

Acceptable Sheet Widths: 11"-12" (280 mm - 305 mm)

Feed Rate: 0.50"/second to 1.50"/second (12mm/sec.) - (40mm/sec.)

Interface: Parallel (Centronics)

Dimensions: (W x D x H) 16.50" x 5.813" x 3.813" (419 mm x 174 mm x 95.5 mm)

Weight: 4.4 lbs. (2 kg)

Environmental Requirements: Temperature: 41º-104ºF (5-40º celsius)

Humidity: 35-80% (no condensation)

Accessories: Dr. STIKA PLUS SOFTWARE for Windows® 95, STIKA DRIVER for Windows® 95/98/NT, Blade holder, Blade, AC adaptor, Material for test cuts, Application tape for test cuts, User's manual