The following is a transcript of the 10 Rules for Forklift Safety Infographic:
10 Rules for Forklift Safety
For all their benefits, forklifts and powered industrial trucks bring with them numerous hazards that endanger both pedestrians and drivers. While they move heavy loads and increase efficiency, forklifts can also cause serious injuries when they are used unsafely. Here are 10 rules for how forklifts are used in the workplace, common hazards, and what OSHA has to say about forklift training.
1. Know the Stats
It’s important to know the dangers that come with using forklifts on loading docks and in warehouses. Keep these statistics in mind while training workers and safely operating forklifts.
More than 1,000,000 forklifts are in operation throughout the United States
Forklift accidents cost businesses $135,000,000 every year
Roughly 70% of all accidents could have been avoided with proper training
OSHA estimates there are 110,000 forklift accidents every year
Roughly 20,000 workers are injured every year in forklift-related accidents
Forklift-related citations are routinely among OSHA’s top 10 violations each year:
2,860 violations in 2016 (sixth most-cited citation)
2,760 violations in 2015 (sixth most-cited citation)
3,147 violations in 2014 (fifth most-cited citation)
3,340 violations in 2013 (sixth most-cited citation)
1,993 violations in 2012 (seventh most-cited citation)
3,432 violations in 2011 (seventh most-cited citation)
Forklift and powered truck fatalities
2014 – 89
2013 – 91
2012 – 95
2011 – 66
Overturned forklifts are the leading cause of deaths involving forklifts; they account for 22% of all forklift-related fatalities
Workers on foot struck by forklifts account for 20% of all forklift-related fatalities
Victims crushed by forklifts account for 16% of all fatalities and falls from forklifts account for 9% of all forklift fatalities
Between October 2015 and September 2016:
1,619 federal inspections led to 2,349 forklift-related citations, totaling $4,266,235 in penalties
Of that total …
756 federal inspections led to 1,076 forklift-related citations in the manufacturing industry, totaling $1,640,164 in penalties
212 federal inspections led to 332 forklift-related citations in the wholesale trade industry, totaling $566,827 in penalties
175 federal inspections led to 219 forklift-related citations in the construction industry, totaling $326,605 in penalties
188 federal inspections led to 292 forklift-related citations in the transportation and warehousing industry, totaling $943,617 in penalties
118 federal inspections led to 169 forklift-related citations in the retail trade industry, totaling $350,548 in penalties
2. Know the Classes
These are classifications of six commonly-used types of forklifts, as recognized by OSHA, along with different types of trucks unique to each class.
Electric Motor Rider Trucks (such as rider-type counterbalanced forklifts and sit-down, three-wheel electric trucks)
Electric Motor Narrow Aisle Trucks (such as high lift straddle trucks and platform side loaders)
Electric Motor Hand Trucks or Hand/Rider Trucks (such as low lift pallet trucks and high lift straddle trucks)
Internal Combustion Engine Trucks with Solid/Cushion Tires (such as counterbalanced fork trucks with cushion tires)
Internal Combustion Engine Trucks with Pneumatic Tires (such as counterbalanced fork trucks with pneumatic tires)
Electrical and Internal Combustion Engine Tractors (such as sit-down riders)
Rough Terrain Forklift Trucks (such as vertical mast type forklifts, variable reach type forklifts, and truck trailer mounted)
3. Know the Common Hazards
Here’s a quick look at a few common hazards associated with forklifts.
Unsecured loads may fall, crushing pedestrians or drivers.
Forklifts may tip over, due to excessive speed or imbalanced loads
Workers may fall if they stand on the forks
Drivers may not see pedestrians, leading to collisions and fatal accidents
Improper or missing floor marking may lead to accidents between forklifts and pedestrians
4. Know the Requirements
Before any employee takes control of a forklift, ensure they’re trained in accordance with OSHA requirements. 29 CFR 1910.178, OSHA’s standard on powered industrial trucks, requires the following:
Employers must have a training program that incorporates general principles of safe operation, the types of vehicle(s) used, any hazards created by using forklifts and powered industrial trucks, and OSHA’s general safety requirements.
Trained forklift operators must know how to do the job safely, as demonstrated in a workplace evaluation.
Employers must provide formal and practical training. This may include using some combination of lecture, video, software training, written material, demonstrations, and practical exercise.
Employers must certify that operators have received all necessary training and evaluate each operator at least once every three years.
Employers must evaluate the operator’s performance and deem the employee competent to operate a powered industrial truck prior to operating the truck.
5. Know What to Watch For
Employees and employers should work together to ensure a forklift is safe to use before getting behind the wheel. Follow these steps before using a forklift.
Perform a daily inspection of all forklifts in use
Examine the tires and oil levels
Check for water, oil, or radiator leaks
Ensure forks are straight and not cracked
Test brakes, lights, the horn, and the steering wheel
Look for obstructions, uneven surfaces, overhead obstacles, and other potential hazards
6. Stay Safe While Using A Forklift
Workers should do the following while behind the wheel to protect themselves and coworkers:
Make sure the load is balanced and fully secure to prevent a forklift from tipping over
Ensure both forks are as far under the load as possible before lifting
Drive with the load as low as safely possible
Pay attention to posted speed limits and warning signs
Always look in the direction you’re traveling; if a load blocks the view ahead, travel in reverse
Steer clear of areas where forklifts are prohibited or restricted
Keep an eye out for signs, floor marking, and other warnings for pedestrians and forklifts
Use the horn at intersections and in areas where pedestrians may be present
7. Keep An Eye Out Around Your Facility
Even if you’re not operating a forklift, you can take steps to keep workers safe. Here are a few tips to keep in mind:
Post forklift safety signs, aisle markers, and forklift procedure labels—using premade signs, custom labels, or a combination of the two
Implement a floor marking system in your facility
Ensure safety signs are at all intersections where pedestrians and vehicles intersect
Use steering wheel covers and padlocks when necessary
Use proper lockout/tagout equipment to prevent forklifts from inadvertently starting up
Request your free Warehouse Safety Hazards & Solutions Guide from Graphic Products for more on identifying and mitigating hazards in your facility: Warehouse Safety Hazard Solutions
8. Implement a Floor Marking System to Keep Workers Safe
OSHA maintains basic rules and regulations for effective floor marking. 29 CFR 1910.22(b)(2), part of the agency’s standard for walking and working surfaces, states: “Permanent aisles and passageways shall be appropriately marked.” The broader standard sets no guideline for floor marking colors unless floor marking is used for preventing physical injuries.
That said, 29 CFR 1910.144—the agency’s standard for outlining safety color codes—mentions that red and yellow are designated safety color codes for marking physical hazards.
Red is for fire-related hazards (including the identification of fire protection equipment and containers of flammable liquids), as well as emergency switches, bars, and buttons on hazardous machines.
Yellow designates caution and is used to mark physical hazards (including stumbling, falling, and “caught in between”).
Improve visual communication with Graphic Products' floor marking resource center. Access our floor marking color codes infographic, Best Practice Guide to Floor Marking, in-depth articles, helpful videos, on-demand webinar, and more: Improve Your Floor Marking System
9. Develop a Visual Communication System
Here are a few tips for successful visual communication, which can alert operators and pedestrians to hazards caused by forklifts:
Use “Stop” signs, speed limit signs, and other traffic control devices
Implement wayfinding to improve the flow of traffic, keep pedestrians away from forklift paths, and direct forklifts along safe routes
Point out loading docks, shelves for inventory, and other important places within a warehouse
Post signs at junctions to warn pedestrians and forklift operators to stop and look for hazards
Display checklists and inspection requirements where forklifts are stored
10. Implement Solutions for Forklift Safety
Many of the hazards posed by forklifts can be mitigated with custom signage and clear visual communication. DuraLabel industrial printers by Graphic Products help you create custom signs on demand, including speed limit signs, printed floor marking tape, maintenance labels, safety reminders, and more. Visit Industrial Label Printers for more information.