Think of yourself as a lab rat. Chemicals synthesized in a laborty before you were even born are now administered to your via the air you breathe, water you drink, food your eat - even the weather. They might be in a light fixture above you right now, gradually misting toxins onto your. Unfortunately all of this is really happening. The toxin is PCB, or polychlorinated biphenyl.
What are PCBs and where are they found?
PCBs are a man-made chemical used in many industrial and commercial applications such as hydraulic and electrical equipment as well as paint, plastic and rubber products, and mechanical lubricants. One of the most common trade names is Aroclor, but there are many others. PCBs are toxic—and they may be around you in your workplace, in the equipment you work with.
PCBs were manufactured over a 50-year period in the United States. During this time the manufacturing process released it into the atmosphere, into the air and water supply, leeching it into the soil. Then birds, fish and other animals came into contact with it, further transporting it, and of course gaining a host of health issues, such as cancer and reproductive failure.
When PCBs were introduced, they were an innovative and exceptionally useful chemical in a variety of industries. It was one of the first flame-retardant chemicals, and has a high flash point and high thermal conductivity. Some types of transformers could only be constructed with the use of PCBs.
The Symptoms and Characteristics of PCBs
In the 1930s, symptoms started presenting in workers in the form of painful black bubbling of the skin, sometimes concluding in liver failure. Initially it wasn't known what was causing this. Chemicals were unregulated, and unsafe work conditions were the norm. Laws were not typically designed to protect the worker, and industry often won out over safety. Stricken workers were typically poor and didn't have money for treatment or investigation beyond the evident symptoms, if that.
Protecting Workers from PCBs
In 1976, the Toxic Substances Control Act was passed, which authorized EPA to control substances it determined were unreasonably risky to public health. EPA evaluated studies and concluded that PCBs cause cancer, suppress the immune system, cause learning deficits, and a host of other serious health issues. PCBs were finally banned in 1979.
After the 1979 ban, PCB-containing items that were disposed of improperly may have resulted in leaks. When these items are crushed, toxins are released into the soil and eventually the water supply. When burned, the toxins make their way into the air. PCBs contaminate rain and snowfall and travel great distances via rivers. It accumulates in food crops and animals consumed by humans. Whether you work around PCBs or not, you may have been contaminated.
PCB-related health issues, though potentially serious for those working around items containing PCBs, are increased when this toxin is released into the environment. The composition of PCB mixtures alters when it binds with soil or accumulates in animals. People who ingest fish contaminated with it--or even come into contact with contaminated soil—are in an increased risk group.
Though PCBs were banned more than three decades ago, this toxin is slow to degrade and we are still at risk.
Who has the greatest risk of exposure to PCBs?
Consumption of marine mammals, fish, or wildlife increases one's risk. A 39-mile river stretch in Green Bay, WI, for instance, is estimated to contain over 51,000 pounds of PCBs. EPA declared the fish and waterfowl as contaminated, and anyone eating them may suffer adverse health effects. But the waterfowl is not contained, nor are the toxins.
There is also a risk to workers that service pre-1979 electrical equipment or handle other equipment that is known to contain PCBs. Even working in a building with such equipment can be risky, and you may not know you're around it. Centers for Disease Control found increased death counts from brain cancer and melanoma in some plants where workers were exposed to PCBs.
PCBs were also used in caulk, with concentrations up to 30%. EPA believes that buildings constructed between 1950-1979 are at high risk of containing PCB-contaminated caulk. Its testing shows public buildings (including schools) and apartment complexes to be at risk although single-family houses are likely to have safe levels.
What can be done to minimize risk to PCBs?
- Mercury, lead, DDT, arsenic, asbestos, PCBs. Life has become a chemical dodge, and it's a personal war to prevent stealth toxins from slowly stealing years from our lives.
- When prepping fish, remove organs, skin, and fat, which is where PCBs are stored; fish fat can be found in the belly, back, and dark meat along the side. Avoid frying or cooking into soup as this retains fat. Do not consume juices which collect during cooking. Do not eat soft green parts of crab or lobster. Highest-risk fish are those that eat other fish.
- When choosing meat or dairy opt for low-fat organic options. Trim fat from meat prior to cooking and avoid frying. Do not consume juices which collect during cooking.
- Don't use treated/painted wood for fires nor burn any substances that could contain PCBs.
- Contractors working on public buildings constructed between 1950-1979 should test caulk prior to removal. If it tests positive, it should not be removed without containment procedures so that toxins are not released into the air.
Good News for Containing PCBS
Methods have been found to contain and neutralize PCBs. There are a variety of EPA-approved disposal facilities designed to treat everything from fluorescent lights to transformers. And though on one hand scientific advancements are what brought us this toxin, it is scientific advancements which shall defeat it.
What Do Employers Need to Know About Labeling PCBs?
All equipment that is known to contain PCBs must be marked. Approved PCB labels in 40 CFR Part 761.45. For any items that are large enough to accommodate a 6" x 6" label, a large mark (ML) label is required. Smaller items may utilize the Small Mark (MS) label, which can be created in a variety of sizes from 0.4" x 0.8" to 1" x 2".
As the specifications are subject to frequent revisions, verify information at that link before beginning the project.
Labeling Fluorescent Light Ballasts
Fluorescent light ballasts are at high risk for PCBs and require labeling in some cases. Manifesting and labeling ARE required for performance-based disposal, per 761.62(a). They ARE NOT required for disposal in solid waste landfills, per 761.62(b). They MAY be required for risk-based disposal, which requires written application to the EPA region where storage shall take place, per 761.62(c). A list of these disposal types in available in 761.62.
Even when labeling is not required, records or optional labeling must show that the waste is less than 1 year old. In other words, they cannot simply be stored indefinitely without being appropriately assessed.
If the ballast was manufactured after July 2, 1979, regulations do not require you to label it as PCB-free. Labeling may be helpful for internal purposes so that the item is known to not require testing or PCB disposal.
If you don't know whether your ballasts contain PCBs, check the manufacturer and type to find out whether they were commonly made with PCBs. If you are unable to determine, you must assume that it does and use an approved PCB disposal process.